Wireless sensor LED Smart Touch/Dimmer 12-24V DC, rechargeable plastic/black (PU 4)

LED Smart Touch/Dimmer wireless sensor.

Touch-sensitive control: turns the LED light on or off when the sensor is touched with the hand.
Built-in dimmer: increase or decrease brightness with a short or long touch.
Radio Frequency Control: acts as a transmitter, transmitting the RF signal to a Smart RF receiver (sold separately).
Control range: the receiver can be located up to 8 metres away and hidden.

Flexible coupling:
- one transceiver can be connected to up to 10 receivers
- one receiver can be linked to up to 10 transmitters
- suitable for multi-point lighting solutions.
- Easy pairing: the emitter and receiver are quickly connected using the built-in buttons.

Quick pairing using the built-in buttons; to reset the pairing, the button must be held down for 10 seconds.
A learning button allows the transmitter to be connected to the receiver without accessing the receiver - particularly useful for solutions that are already installed or difficult to access.

Rechargeable battery:
500 mAh lithium battery
charging via USB with standard 5 V DC charger
full charge in about 3 hours (5 V/2 A with charger).

Battery life:
- up to 700 on/off cycles per charge.
- up to 18 months in standby mode with the emitter switched off by the integrated ON/OFF switch.

Battery life: around 500 full charge cycles.

Material: plastic
Finish: black

Compatibility: with Smart converters and 12 V DC and 24 V DC LED luminaires.
Easy to install: a metal sticker with magnets is included, allowing the transmitter to be easily attached and removed for charging, relocation or remote control.